Mamiya RB67 / Graflex 23 Magazine Mounting Flange for Homemade Camera Builders DIGITAL DOWNLOAD
DIGITAL DOWNLOAD. For the Physical product, click here: https://www.cameradactyl.com/buttergrip/graflex23pinhole
This camera takes a standard Graflex 23 back, or a Mamiya RB67 series back, which are available in sizes from 6x4.5 to 6x9. It has a 45mm focal length, and you attach your preferred pinhole inside the box with black gaffers tape.
Vertical and horizontal tripod threads are 3/8x16.
These files are for PERSONAL USE. you can print as many as you want for YOURSELF. You may not sell, distribute, or alter these files, nor sell physical goods made from them. If you would like to make and sell physical products, please send me an email!
Slicer Settings:
0.2 - 0.3mm layer height
0.4mm nozzle
no brim
NO SUPPORT for the body.
SUPPORT ON FOR THE CLIPS.
3 to 4 shell layers, top, bottom, and side walls
MINIMUM 35% rectilinear infill
All files oriented correctly towards the bed for printing.
Turn ON avoid crossing perimeters.
Turn OFF support for bridges
DIGITAL DOWNLOAD. For the Physical product, click here: https://www.cameradactyl.com/buttergrip/graflex23pinhole
This camera takes a standard Graflex 23 back, or a Mamiya RB67 series back, which are available in sizes from 6x4.5 to 6x9. It has a 45mm focal length, and you attach your preferred pinhole inside the box with black gaffers tape.
Vertical and horizontal tripod threads are 3/8x16.
These files are for PERSONAL USE. you can print as many as you want for YOURSELF. You may not sell, distribute, or alter these files, nor sell physical goods made from them. If you would like to make and sell physical products, please send me an email!
Slicer Settings:
0.2 - 0.3mm layer height
0.4mm nozzle
no brim
NO SUPPORT for the body.
SUPPORT ON FOR THE CLIPS.
3 to 4 shell layers, top, bottom, and side walls
MINIMUM 35% rectilinear infill
All files oriented correctly towards the bed for printing.
Turn ON avoid crossing perimeters.
Turn OFF support for bridges
DIGITAL DOWNLOAD. For the Physical product, click here: https://www.cameradactyl.com/buttergrip/graflex23pinhole
This camera takes a standard Graflex 23 back, or a Mamiya RB67 series back, which are available in sizes from 6x4.5 to 6x9. It has a 45mm focal length, and you attach your preferred pinhole inside the box with black gaffers tape.
Vertical and horizontal tripod threads are 3/8x16.
These files are for PERSONAL USE. you can print as many as you want for YOURSELF. You may not sell, distribute, or alter these files, nor sell physical goods made from them. If you would like to make and sell physical products, please send me an email!
Slicer Settings:
0.2 - 0.3mm layer height
0.4mm nozzle
no brim
NO SUPPORT for the body.
SUPPORT ON FOR THE CLIPS.
3 to 4 shell layers, top, bottom, and side walls
MINIMUM 35% rectilinear infill
All files oriented correctly towards the bed for printing.
Turn ON avoid crossing perimeters.
Turn OFF support for bridges