THIS LISTING IS FOR A DIGITAL DOWNLOAD.
These files are for PERSONAL USE. you can print as many as you want for YOURSELF. You may not sell, distribute, or alter these files, nor sell physical goods made from them. If you would like to make and sell physical products, please send me an email!
Slicer Settings:
0.3mm layer height
0.4mm nozzle
no brim
Support only on complete overhang (tripod screw ring recess area)
4 shell layers, top, bottom, and side walls
MINIMUM 35% rectilinear infill (higher infill will make a denser grip)
All files oriented correctly towards the bed for printing.
Turn ON avoid crossing perimeters.
Turn OFF support for bridges
THIS LISTING IS FOR A DIGITAL DOWNLOAD.
These files are for PERSONAL USE. you can print as many as you want for YOURSELF. You may not sell, distribute, or alter these files, nor sell physical goods made from them. If you would like to make and sell physical products, please send me an email!
Slicer Settings:
0.3mm layer height
0.4mm nozzle
no brim
Support only on complete overhang (tripod screw ring recess area)
4 shell layers, top, bottom, and side walls
MINIMUM 35% rectilinear infill (higher infill will make a denser grip)
All files oriented correctly towards the bed for printing.
Turn ON avoid crossing perimeters.
Turn OFF support for bridges
Image 1 of 31
Image 2 of 31
Image 3 of 31
Image 4 of 31
Image 5 of 31
Image 6 of 31
Image 7 of 31
Image 8 of 31
Image 9 of 31
Image 10 of 31
Image 11 of 31
Image 12 of 31
Image 13 of 31
Image 14 of 31
Image 15 of 31
Image 16 of 31
Image 17 of 31
Image 18 of 31
Image 19 of 31
Image 20 of 31
Image 21 of 31
Image 22 of 31
Image 23 of 31
Image 24 of 31
Image 25 of 31
Image 26 of 31
Image 27 of 31
Image 28 of 31
Image 29 of 31
Image 30 of 31
Image 31 of 31