CAMERADACTYL IS PRODUCING YOUR ORDERS IN BATCHES.
ALL DIGITAL DOWNLOADS WILL BE PROCESSED IMMEDIATELY.
NEXT PHYSICAL PRODUCT ORDER BATCH WILL BE FULFILLED BY SEPTEMBER 25th.
THANK YOU FOR YOUR PATIENCE.
The CAMERADACTYL X-Pin is a Panoramic Pinhole camera that takes 24x56mm pictures on 35mm film. The X-Pin is a DIY Kit that requires complete assembly.
The camera is sold in three ways, all are DIY kits:
camera body only, with a random color shutter button and knob.
camera body with viewfinder with a random color shutter button and wind knob.
camera body with viewfinder with a custom color shutter button and wind knob.
Please note that there is a color form for all of these options, but we will only read the color form for a CUSTOM COLOR X-Pin camera kit.
Below are some necessary supplies and a link to full build and user instructions:
Required Materials:
Wood glue
Black paint
soda/beer can
Pin or micro-drill bit (.2mm recommended)
Super Glue (Cyanoacrylate, also sold as Krazy Glue)
Two small wood screws and washers. (about 10mm or ½ inch size 4 or 5 wood screws work nicely)
35mm film and either an empty reloadable cassette, or empty commercial 35mm film roll with a leader sticking out.
Recommended Materials:
Sandpaper
Q-tips / Cotton swabs
Masking tape
¼-20 nut (standard hardware for optional tripod mount)
M3 hex wrench/ allen key.
Much patience
The CAMERADACTYL X-Pin is a Panoramic Pinhole camera that takes 24x56mm pictures on 35mm film. The X-Pin is a DIY Kit that requires complete assembly.
The camera is sold in three ways, all are DIY kits:
camera body only, with a random color shutter button and knob.
camera body with viewfinder with a random color shutter button and wind knob.
camera body with viewfinder with a custom color shutter button and wind knob.
Please note that there is a color form for all of these options, but we will only read the color form for a CUSTOM COLOR X-Pin camera kit.
Below are some necessary supplies and a link to full build and user instructions:
Required Materials:
Wood glue
Black paint
soda/beer can
Pin or micro-drill bit (.2mm recommended)
Super Glue (Cyanoacrylate, also sold as Krazy Glue)
Two small wood screws and washers. (about 10mm or ½ inch size 4 or 5 wood screws work nicely)
35mm film and either an empty reloadable cassette, or empty commercial 35mm film roll with a leader sticking out.
Recommended Materials:
Sandpaper
Q-tips / Cotton swabs
Masking tape
¼-20 nut (standard hardware for optional tripod mount)
M3 hex wrench/ allen key.
Much patience